The SHS3 Safety Hinge Switch from Bernstein implements numerous features which the user has been demanding.

SHS3 Safety Hinge Switch The SHS3 Safety Hinge Switch from Bernstein implements numerous features which the user has been demanding. For instance, the switching point of the SHS3 is freely settable in an angle range of 270deg. But the most important innovation of the SHS3 is the opportunity to re-adjust the switching point even after it was set.

This is a feature that no other product on the market can offer.

Another novelty is the modular structure: using the same hinge, it is now be possible to build a system with a right or left end stop.

In addition, both front installation and interior installation between the profiles can be realised.

But no matter which type of installation is needed, the switching point can be freely set over the entire angle range.

And the SHS3 has much to offer as regards switching technology.

Being equipped with two forced opening safety contacts and a signal contact, it allows for a layout up to control category 4 according to EN 945-1 in a redundant system.

Bernstein's new SHS3 has been developed as a full load hinge and has a protection of IP 67.