Since more and more automation applications are getting miniaturised, the demand for smaller sizes of tubing and fittings is on the rise, hence the introduction of miniature tubing and fittings.
SMC Corporation of America, the world's largest manufacturer of pneumatic automation products has announced the release of series TU/M miniature tubing and fittings. Since more and more automation and medical device applications are getting miniaturised, the demand for smaller sizes of tubing and fittings is on the rise. SMC responds to this demand with their new line of miniature tubing and fittings.

SMC now offers their polyurethane tubing in a new 2mm outside diameter (OD and 1.2mm inside diameter - ID) size.

Seven standard colors are available (black, blue, white, red, yellow, green and clear) in 20m rolls.

With a minimum bending radius of only 4mm and an OD of only 2mm, this tubing can go places never before possible.

Maximum operating pressure (at 68 deg F) is 116 lb/in2.

Suitable fluids include air and water.

Four new fitting configurations have been developed to coincide with this new tubing.

Straight and elbow style barbed fittings are available with either M# or M5 threads and a unique collar that helps hold the tubing on the barb better.

Barb to one-touch unions allow you to step down to the smaller tubing size where needed and plug in reducers allow direct connection of the 2mm tube to valve manifolds with built in one-touch fittings.

SMC Corporation manufactures high quality actuators and cylinders, airline and air preparation equipment, high-purity products, vacuum components, instrumentation, and a host of fittings and accessories applicable to the pneumatic automation industry.

SMC has a total of 14 production facilities, 3 of which are in North America -Indiana, California, and Ontario, Canada.

SMC's global presence enables it to provide quality customer service in any part of the world.